I need TPMS pressure info

[FastandFurious]

I’m upgrading from stock 18-inch wheels to the 20-inch Limited style. Does anyone know the TPMS pressure setting for these?

 

[Carl Stone]

pgrading from stock 18-inch whe

The TPMS pressure setting for 20-inch wheels is typically around 35-40 psi, but check your vehicle’s manual for specifics.

 

[FastandFurious]

The TPMS pressure setting for 20-inch wheels is typically around 35-40 psi, but check your vehicle’s manual for specifics.

Thanks Carl! I’ll double-check the manual to confirm the exact pressure for the 20-inch wheels.

 

[Anne_Bonny]

Nice upgrade! The factory TPMS setting for the 20-inch Limited wheels is usually around 36 PSI, but it’s worth double-checking the sticker inside the driver’s door for your specific setup. If you’re towing or loading up, you might want to bump it up a couple of PSI for stability.

 

[Rammed]

I spoke with another Laramie owner who also upgraded to 20-inch wheels, and we both keep our tire pressure at 36 psi. Hope this helps!

 

[FastandFurious]

Nice upgrade! The factory TPMS setting for the 20-inch Limited wheels is usually around 36 PSI, but it’s worth double-checking the sticker inside the driver’s door for your specific setup. If you’re towing or loading up, you might want to bump it up a couple of PSI for stability.

Good tip about adjusting for towing, I might need that with my weekend trips.

 

[FastandFurious]

I spoke with another Laramie owner who also upgraded to 20-inch wheels, and we both keep our tire pressure at 36 psi. Hope this helps!

Thanks for sharing that...sounds like 36 PSI is the sweet spot. I’ll stick with that unless I need to adjust for towing.